Mesh for slope stabilization - Prodac.bekaert.com
Prodac.bekaert.com

Mesh for slope stabilization

This mesh is made up of active and passive anchors, which are distributed throughout the slope’s face. It also includes a perimeter fastening system, which is made up of border cables and cable lacing.   The product is highly elastic, given that it is made of a membrane that, when coupled with the anchoring screw, sheeting, bolts and cables, helps prevent accidents.

Characteristics

Geometric characteristics

  • Opening : 50 mm +- 5 mm
  • Wire diameter: 4.40 mm +- 0.10 mm
  • Approximate weight: 5.5 kg/m2

Performance characteristics

  • Minimum tensile strength: 13.450 N (1.379 kg)
  • Minimum resistance of the mesh at both axes: 147.150 N/m (15.000 kg/m)
  • Minimum shear failure load: 110.000 N/m2 (11, 210 kg)
  • Coating Zn/ Al 90/10: 150 g/m2

Uses

  • Stabilization of high-transit road or mining slopes.
  • Fortification of mining tunnels.
  • Makes it unnecessary to use.
  • © Prodac.bekaert.com 2021 / Av. Néstor Gambetta 6429, Callao - PERÚ / Telf.: 51 (1) 613 6666 - Fax.: 51 (1) 577 0041 -
  • Aviso Legal